Happy Mother’s Day!

Happy Mother’s Day to all you Mother’s out there.  The first card I made was for my own Mom.  

Mom's card

Mom’s card

I was searching Pinterest for a different and unique idea to make my Mom for Mother’s Day.  After spending longer than I needed to on Pinterest, I came across a card, that I wanted to try or do something similar.  

Card by The Crafty Owl

Card by The Crafty Owl

The card above was created by Joanne James, who is a Stampin’ Up Demonstrator in the UK.  To find out more about Joanne and her projects visit her blog, The Crafty Owl.  

To make my Mom’s card, I cut the front of my white base in half so I had a flap.  I cut out a circle using the Couzzle cutting system.  I made sure that if it was attached to the front flap, it would not hang off over the edge of the card.  To make the flowers I used the Secret Garden stamp set and matching framelits.  I arranged them on the white circle, making sure they fit without hanging off the edge.  After I attached them, I punched out smaller flowers using solid card stock.  Then I stamped Mom in the center to finish the card.  Thanks to Joanne for the different card layout idea.  


Stamps: Secret Garden and Family Reunion (Stampin’ Up)

Inks: Pretty in Pink, Coastal Cabana, Pink Passion and Bermuda Bay (Stampin’ Up)

Other: teal, pink card stock and printed paper, flower punch (Stampin Up)

Next up is a card for my Grandma.  My Grandma is a watercolor artist, so I decided to make a watercolor Mother’s Day card.  

Grandma's Card

Grandma’s Card

To get the watercolor technique to look like watercolor it took me a few tries to get it to look like it should.  To make this card, I sprayed water all over the watercolor paper.  Then I used my juiciest ink pads; I quickly stamped the stamps on the ink pads and then on the wet watercolor paper.  I kept doing this with different colors and stamps.  When I noticed the paper was getting dry, I would spray it with more water.  Some of the stamped flowers look like they are supposed to with the colors blending and bleeding.  I had to let the watercolor paper dry overnight.  When it was dry, I attached it to a card and added a scalloped punched strip of teal paper and and gold piece of ribbon.  I then stamped the sentiment on a scalloped oval and added a butterfly.  

The next card is identical in layout to the card above, I just used different colors and a slightly different watercolor technique.

1st Mother's Day card

1st Mother’s Day card

This card is for my cousin, Peter’s wife, Hilarie.  Hilarie and Peter will both be celebrating their very first Mother’s and Father’s Day this year!!      

Luna at 4 months

My cousin, Luna at 4 months. 


I just love to look at her...

I just love to look at her…

Anyways back to the post…. 

First, I sprayed the watercolor paper lightly with a mist of water.  Then I used more juicy ink pads, and stamped the stamps in the ink and then I spritzed them again with water then I stamped them on the wet paper.  I continued on and would wet the paper when it was getting dry.  This method made the stamped flowers bleed and blend more than the second card.


Stamps: Secret Garden, Papillon Potpourri, and Family Reunion (Stampin’ Up)

Inks: Calypso Coral, Coastal Cabana, Pretty in Pink, and Bermuda Bay (Stampin’ Up)

Other:  Butterfly punch, scalloped oval punch, Calypso Coral card stock (Stampin’ Up), teal card stock, gold ribbon, number 1 stamp, pink mini letter stickers (Studio Calico)

Hope you liked all my cards.  Let me know if you have any questions.  

Happy Stamping




My Valentines

This year I started working on my Valentine’s Day cards much earlier than I usually do, which is good because they were complicated.  Even though they took some time they turned out super cute.  First is the envelope banner Valentine.























Speaking of super cute, my new little cousin Luna Hazel is posing with her Valentine that I made for her.  I used the tiny envelope stamp that was in the Freckled Fawn + Hero Arts September 2013 kit  and stamped it on several 6×6 pattern papers. I used VersaMark to stamp the image because I wanted to heat emboss each envelope to add some shine and to make them not so flat.  I made a total of 25 tiny envelopes for other Valentines.  Then I cut them all out by hand…yes by hand!  I then cut two very short slits on each side of the envelope flap to make a hole wide enough to slide the scrapper’s floss through.  Scrapper’s Floss is made out of tightly twisted paper.  I like it because it is tighter and stays together better than baker’s twine or embroidery floss.  Once I put all the envelope on the scrapper’s floss, I attached the tiny banners to the Bazzill Bling Basics paper.  I embossed the card stock with a heart pattern embossing folder.  I used Zots at both ends to attach the envelope banner to the card.  Then I made mini bows out of Scrapper’s Floss and attached them with a small Zot.  I did not attach each envelope with a Zot; the Scrapper’s Floss is stiff so the envelopes did not more when on the floss.  I stamped “Thoughts of You Warm My Heart” in Going Grey on the pink banner and added a small heart in Melon Mambo.  

Supplies Used:

Stamps: Envelope stamp (Freckled Fawn + Hero Arts – Sept. 2013 Kit), Filled with Love (Stampin’ Up)

Inks: black, VersaMark, Going Grey & Melon Mambo (Stampin’ Up)

Others: Scrapper’s Floss (Karen Foster) and Zots.  

Next is my Valentine’s Day card for my parents.  



First I embossed the background paper with a sprinkled hearts embossing folder.  I stamped LOVE with VersaMark and used a red glitter embossing powder to set it.  I punched out the inside of the “o” with a circle punch.  Inside the “o” I put a larger pink circle behind it.  To finish it off I added a white heart embellishment from a Studio Calico card kit.  I set it aside and worked on the heart stamped paper.  I used heart stamps from both Filled with Love and Hearts a Flutter sets by Stampin’ Up.  The white stamped paper needed a pop so I added two stripes of pink card stock. 

Supplies Used:

Stamps: Filled with Love and Hearts a Flutter (Stampin’ Up)

Inks: Pretty in Pink, Real Red, and Melon Mambo (Stampin’ Up)

Other: Scallop border punch (Stampin’ Up), heart embellishment (Studio Calico), and red embossing glitter.

Lastly is the card I made and sent to my close friends, this one also had a lot of steps to it and took me a while to complete.  Here we go…



To make this card I started out with the jar and hearts part.  I stamped the jar in VersaMark, then covered it in black embossing powder and set it with a heat gun.  Next I found lots of white skinny scraps of paper (wide enough to punch a small heart out).  I looked through all of my spray mists to find colors that went well with each other.  I put all the white scraps in a box and sprayed them with the mists.  While they dried, I searched for pattern papers that went with the colors of spray inks.  The background paper  has an ombre pattern to it.  Since these Valentine’s were going to be mailed, I didn’t want to have to add extra postage due to their weight, so I cut the inside out of the background paper.  Then I used the white pattern paper on top of the cut out background piece.  Next I used the piece that was cut out of the background paper, I cut so it would fit on top of the white pattern paper.  Before attaching it to the white pattern paper, I used the outline heart stamp from the Hearts A Flutter set and stamped it in Pretty in Pink.  The outlined heart image added more detail to the card.  


Now that I had all of the pattern papers cut to size and assembled on the cards, it was time to move on to the jars.  I carefully cut out each jar leaving a smell white edge.  Then I used an exacto-knife to cut two slits on the top of the jar.  If you look at the jar in the picture above there is a heart that has been slipped under the jar’s lip.  I wanted the hearts to look like they were coming out of the jar, therefore I had to cut the jar’s lip so I could slip a heart under it.  I had to wait for the scraps to dry overnight, so that I could punch the heart out without the paper ripping and jamming the punch.  The next day when the paper was dry, I used a small heart punch and punched out lots and lots of small sparkly hearts.  Before I attached the hearts to the jar, I layered them on the jar arranging them neatly in a small pile.  I moved the hearts around to make them look like they were sitting filling up the jar.  Once each heart had a place I adhered them with small double sided tape square.  I continued laying the hearts up and out of the jar on the card.  To finish the card, I tired a bow around the card, and added the “All You Need is Love” banner.  

Supplies Used: 

Stamps: Hearts a Flutter & All Wrapped Up (Stampin’ Up), “All You Need is Love” stamp (Amy Tangerine)

Inks: Calypso Coral and Pretty in Pink (Stampin’ Up), VersaMark

Other: Pattern Papers (SEI), ribbon, heart punch, glimmer mists: Alaskan Salmon, Vintage Pink, Cherry Limeade, and Mel’s Diner (Tattered Angels), Color Shines: Gold and Peach (Heidi Swapp) 

Hope you enjoyed these cards.